C3750 UNIX Workstation
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Airflow Guide |
A4986-00026 |
I/O card air divider (baffle) - Mounts in the upper rear of the chassis assembly (above the two rear panel fans) |
| Bezel |
A9365-84010 |
Front bezel assembly - Includes front bezel with molded in display bezel and power button, blank CD-ROM and floppy filler panels, and security lock |
| Bracket |
A4978-62006 |
CD-ROM drive mounting bracket |
| A4986-00039 |
Fan mounting bracket for 80mm hard disk / memory cooling fan |
| A4986-40005 |
Fan/speaker bracket assembly - Has PC board guides on rear for the I/O boards |
| A4986-62006 |
Floppy disk drive mounting bracket - Mounts below the CD-ROM drive |
| Cable |
5182-1857 |
Audio cable assembly - For CD-ROM, CD-RW, or DVD-ROM - 4-pin (F) connector to 4-pin (F) connector - 47.8cm (18.8in) long - From CD-ROM drive to system processor board |
| A4986-63002 |
IDE CD-ROM drive ribbon cable with ferrite - 40-pin (F) connector marked 'to PCA' to a 40-pin (F) connector marked 'to CD-ROM' - 34cm (13.4in) long - From CD-ROM drive to system processor board |
| A4986-63003 |
Ultra SCSI/Low Voltage Differential (LVD) SCSI cable - Has one 68-pin (M) connector on each end - 0.6m (2ft) long - From SCA hard drive backplane board to system processor board |
| A4986-63004 |
Floppy drive ribbon cable with ferrite - 34-pin (F) connector marked 'to PCA' to 34-pin (F) connector marked 'to floppy' - 43.2cm (17in) long |
| A4986-63005 |
Drive power cable - Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires - 85cm (33.5in) long - From CD-ROM and floppy drives to system processor board |
| A4986-63006 |
Ribbon cable - DB-25 (M) connector to 20-pin (F) connector - 46cm (18in) long - From LCD display to system processor board |
| Chassis |
A9365-62001 |
Chassis assembly - Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly |
| Display |
A4978-62025 |
LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector - Mounts to the front of the chassis assembly |
| Drive |
A1658-69031 |
18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60031) |
| A7208-69001 |
36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A7208-67001) |
| A7207-69001 |
73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A7207-67001) |
| D4385-70001 |
48X CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector (Mitsumi) |
| D4389-60091 |
IDE CD-ROM drive - 48X CD-ROM read (Mitsumi CRMC-FX4820T) - Has front panel headphone jack and volume control |
| D4388-69018 |
ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 40x-max CD-ROM read - Half height drive |
| Drive (Product) |
A4998A |
18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A6031A |
36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A7208A |
36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7207A |
73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A5001A |
32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
| A7853A |
IDE CD-RW drive - 24X CD-R write, 10X CD-RW rewrite, 40X CD-ROM read |
| A5009A |
1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
| Fan |
A4978-62012 |
Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable - 12VDC nominal operating voltage - Mounts to the I/O card cage bracket |
| A4978-86014 |
Tubeaxial fan kit (Panaflo model FBA12G12H) - 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable - 12VDC nominal operating voltage - Includes ESD wrist strap and instructions - Mounts on the rear of the chassis assembly (Two used) |
| Graphics (Product) |
A1262A |
HP VISUALIZE-FX5 Pro PCI graphics card - 64MB SDRAM memory |
| A1299B |
HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
| A4982B |
HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
| A7789A |
HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
| Hardware |
0624-0727 |
Pan head Taptite thread-cutting screw - 6-32 thread, 0.437-inch long, Torx T15 recess with slot, conical washer - Carbon steel, zinc-yellow chromate conversion |
| A4978-00039 |
Cover thumbscrew - 6-32 thread - Holds the top cover on the chassis (two used) |
| Interface (Product) |
A4926A |
LAN adapter - 1000Base-SX PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A4929A |
LAN adapter - 1000Base-T PCI Gigabit Ethernet LAN adapter - Supports all PCI bus configurations |
| A5158A |
1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
| A5158AR |
1Gbps Tachyon TL PCI 2x Fiber Channel (FC) adapter - Single channel, short wave - Has SC connectors |
| A6795A |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6795AR |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| B5509BA |
100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX operating system |
| J3525A |
WAN adapter - Two port X.25 PCI frame relay adapter card |
| J3526A |
WAN adapter - Four port X.25 frame relay adapter card |
| Keyboard |
A4983-60401 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Options ABA, ABC, ABH, ABJ, ABM, ABZ and AB2 - English) |
| A4983-60403 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABD - German) |
| A4983-60404 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABE - European Spanish) |
| A4983-60405 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABF - European French) |
| A4983-60406 |
USB keyboard with JIS-109 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AR0 - Japan, Kanji) |
| A4983-60409 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABN - Norwegian) |
| A4983-60411 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABP and ABQ - Switzerland, German/French) |
| A4983-60412 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABS and ABX - Swedish/Finnish) |
| A4983-60413 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABU - U.K., English) |
| A4983-60414 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AKX - Belgian Flemish) |
| A4983-60416 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABY - Danish) |
| A4983-60421 |
USB keyboard with PC-106 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB1 - Korean) |
| A4983-60423 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB0 - Taiwan, Traditional Chinese) |
| Memory (DIMM) |
A3860-69001 |
128MB, 120MHz SDRAM DIMM memory module - (Part of A4993A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3860-66501) |
| A3862-69001 |
256MB, 120MHz SDRAM DIMM memory module - (Part of A4994A) |
| A3863-69001 |
512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3863-66501) |
| A3864-69001 |
1024MB, 120MHz SDRAM DIMM memory module - (Part of A6016A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3864-66501) |
| Memory (Product) |
A4993A |
128MB, 120MHz SDRAM DIMM memory module |
| A4994A |
256MB, 120MHz SDRAM DIMM memory module |
| A4995A |
512MB, 120MHz SDRAM DIMM memory module |
| A6016A |
1024MB, 120MHz SDRAM DIMM memory module |
| Module |
A1658-86004 |
Realtime clock module kit - Includes clock module, ESD wrist strap, and replacement instructions |
| Mouse |
A4983-60101 |
USB 3-button scrolling mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| A4983-65111 |
USB 3-button mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| PC Board |
A4986-86003 |
SCA (Single connector attach) hard disk backplane PCA - Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors - Mounts to the rear of the hard drive bay |
| PC Board (Graphics) |
A1262-69001 |
VISUALIZE-FX5 Pro PCI graphics card - 64MB SDRAM memory
REQUIRES RETURN OF DEFECTIVE PART(New part = A1262-66501) |
| A4982-69001 |
HP VISUALIZE-fxe PCI graphics board - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4982-66501) |
| A4982-69502 |
HP VISUALIZE-fxe (rev B) PCI graphics board - 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz
REQUIRES RETURN OF DEFECTIVE PART(New part = A4982-66502) |
| A7789-69510 |
HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system - (Part of A7789A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A7789-60510) |
| PC Board (Interface) |
B5509-66001 |
100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX operating system - (Part of B5509BA) |
| Power Cord |
8120-1351 |
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-8376 |
Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| 8120-8871 |
Power cord (Black) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Thailand, Cambodia, Vietnam, and the Philippines) |
| Power Supply |
A4986-69001 |
Power supply assembly (500 watts) - Includes power supply, safety interlock switch, and AC power connector - Mounts in the lower left of the chassis assembly
REQUIRES RETURN OF DEFECTIVE PART(New part = A4986-60001) |
| Retainer |
A4986-40007 |
PCI board retainer clip - Keeps the PCI boards secure in the system board connector slots |
| Speaker |
5063-4513 |
Speaker - 7.62cm (3.0in) diameter, 8-ohm impedance, 1.5-watt - Has attached 45.7cm (18in) long cable with 2-pin connector - Mounts in the I/O fan and speaker bracket assembly |
| Terminator |
A4986-63008 |
LVD (Low voltage differential)/single-ended SCSI terminator - Has integral status LED which displays single-ended or low voltage differential mode - 68 pin (M) with thumbscrews |
