VISUALIZE C3000 UNIX Workstation
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Airflow Guide |
A4986-00026 |
I/O card air divider (baffle) |
| Bezel |
A4986-62003 |
Front bezel assembly - Includes front bezel with molded in display bezel and power button, blank CD-ROM and floppy filler panels, and security lock |
| Bracket |
A4978-62006 |
CD-ROM drive mounting bracket |
| A4986-00039 |
Fan mounting bracket for 80mm hard disk / memory cooling fan |
| A4986-40005 |
Fan/speaker bracket assembly - Has PC board guides on rear for the I/O boards |
| A4986-62006 |
Floppy disk drive mounting bracket |
| Cable |
5182-1857 |
Audio cable assembly - For CD-ROM, CD-RW, or DVD-ROM - 4-pin (F) connector to 4-pin (F) connector - 47.8cm (18.8in) long |
| A4986-63002 |
IDE CD-ROM drive ribbon cable with ferrite - 40-pin (F) connector marked 'to PCA' to a 40-pin (F) connector marked 'to CD-ROM' - 34cm (13.4in) long - From CD-ROM drive to system processor board |
| A4986-63003 |
Ultra SCSI/Low Voltage Differential (LVD) SCSI cable - Has one 68-pin (M) connector on each end - 0.6m (2ft) long |
| A4986-63004 |
Floppy drive ribbon cable with ferrite - 34-pin (F) connector marked 'to PCA' to 34-pin (F) connector marked 'to floppy' - 43.2cm (17in) long |
| A4986-63005 |
Drive power cable - Two 4-pin (F) connectors with four wires and a 4-pin (F) connector with two wires - 85cm (33.5in) long - From CD-ROM and floppy drives to system processor board |
| A4986-63006 |
Ribbon cable - DB-25 (M) connector to 20-pin (F) connector - 46cm (18in) long - From LCD display to system processor board |
| Chassis |
A4986-86006 |
Chassis assembly - Includes: 2 rear fans, hard drive/memory fan, I/O card fan, I/O card guide with speaker, I/O card bracket, air divider, IDE, FDD, and SCSI LVD power and data cables, status panel with cable, drive trays, and the front bezel assembly |
| Display |
A4978-62025 |
LCD display with power switch mounted in a plastic bracket - Has attached 1-inch ribbon cable with male DB-25 connector |
| Drive |
A1658-69028 |
9.1GB Ultra2 Wide SCSI LVD hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high, and 80-pin SCA connector (Quantum Atlas V, 3.5 series) - (Part of A4996A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60028) |
| A1658-69027 |
9.1GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST39102LC) - (Part of A4997A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60027) |
| A1658-69031 |
18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC) - (Part of A4998A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60031) |
| A1658-69032 |
36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC) - (Part of A6031A)
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3694) |
| Drive (Product) |
A5001A |
32x-max CD-ROM drive - Half-height CD-ROM drive with ATAPI IDE connector |
| A5009A |
1.44MB floppy drive - 3.5-inch form factor with IDE PC/AT interface |
| A4996A |
9.1GB Ultra2 wide SCSI LVD hard drive - 7,200 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A4997A |
9.1GB Ultra2 wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A4998A |
18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A6031A |
36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| Fan |
A4978-62012 |
Tubeaxial fan (Panaflo model FBA09A12H) 92mm x 92mm x 25mm thick fan with 22cm long three wire cable - 12VDC nominal operating voltage - Mounts to the I/O card cage bracket |
| A4978-86014 |
Tubeaxial fan kit (Panaflo model FBA12G12H) - 120mm x 120mm x 37mm thick fan with 30cm long 3-wire cable - 12VDC nominal operating voltage - Includes ESD wrist strap and instructions - Used for CPU cooling |
| Graphics (Product) |
A4552A |
HP VISUALIZE-fx2 graphic accelerator board - 24/8 bit accelerated 3D solids - Has EVC video connector - Requires HP-UX 10.20 with 'Additional Core Enhancements' (ACE) |
| A4552AR |
VISUALIZE-FX2 graphic accelerator board - 24/8 bit accelerated 3D solids - Has EVC video connector - Requires HP-UX 10.20 with 'Additional Core Enhancements' (ACE) |
| A4553B |
HP VISUALIZE-FX4 PCI graphics card |
| A4559A |
Texture memory upgrade for VISUALIZE-FX4 - Adds 16MB texture memory and 32KB x 32KB virtual texture cache |
| A4559B |
Texture memory upgrade for VISUALIZE-FX4 - Adds 16MB texture memory and 32KB x 32KB virtual texture cache |
| A4977A |
HP VISUALIZE-EG PCI graphics card with 4MB memory - The EG card is 8 plane with 8 overlay planes - Can be used in either a 3.3V or 5.0V PCI slot |
| A4556A |
Video output board for VISUALIZE-FX series graphics products only - Provides NTSC, PAL,AND S-VIDEO outputs |
| Ground Strap |
9300-1408 |
Disposable ESD ground wrist strap |
| Hardware |
0624-0727 |
Pan head Taptite thread-cutting screw - 6-32 thread, 0.437-inch long, Torx T15 recess with slot, conical washer - Carbon steel, zinc-yellow chromate conversion |
| A4978-00039 |
Cover thumbscrew - 6-32 thread |
| Keyboard |
A4983-60401 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Options ABA, ABC, ABH, ABJ, ABM, ABZ and AB2 - English) |
| A4983-60403 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABD - German) |
| A4983-60404 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABE - European Spanish) |
| A4983-60405 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABF - European French) |
| A4983-60406 |
USB keyboard with JIS-109 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AR0 - Japan, Kanji) |
| A4983-60409 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABN - Norwegian) |
| A4983-60411 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABP and ABQ - Switzerland, German/French) |
| A4983-60412 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABS and ABX - Swedish/Finnish) |
| A4983-60413 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABU - U.K., English) |
| A4983-60414 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AKX - Belgian Flemish) |
| A4983-60416 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABY - Danish) |
| A4983-60421 |
USB keyboard with PC-106 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB1 - Korean) |
| A4983-60423 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB0 - Taiwan, Traditional Chinese) |
| Manual |
A4985-90010 |
HP VISUALIZE B1000/C3000 installation guide (English) |
| A4985-90013 |
HP VISUALIZE B1000/C3000 owner's guide (English) |
| Memory (DIMM) |
A3860-69001 |
128MB, 120MHz SDRAM DIMM memory module - (Part of A4993A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3860-66501) |
| A3862-69001 |
256MB, 120MHz SDRAM DIMM memory module - (Part of A4994A) |
| A3863-69001 |
512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3863-66501) |
| A3864-69001 |
1024MB, 120MHz SDRAM DIMM memory module - (Part of A6016A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3864-66501) |
| Memory (Product) |
A4993A |
128MB, 120MHz SDRAM DIMM memory module |
| A4994A |
256MB, 120MHz SDRAM DIMM memory module |
| A4995A |
512MB, 120MHz SDRAM DIMM memory module |
| A6016A |
1024MB, 120MHz SDRAM DIMM memory module |
| Mouse |
A4983-60101 |
USB 3-button scrolling mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| Mouse (Product) |
A4361C |
HP Spaceball 3003 FLX 6-axis, 2-button serial input device |
| A4992A |
HP Spaceball 4000 FLX 6-axis, 12-button serial input device |
| Nameplate/Logo |
A4986-84001 |
Nameplate - HP VISUALIZE C3000 series UNIX workstation logo - Snaps into the front bezel
NO LONGER SUPPLIED |
| PC Board |
A4986-86003 |
SCA (Single connector attach) hard disk backplane PCA - Has one female 68-PIN connector, and two 80-PIN SCA hard drive connectors |
| PC Board (Graphics) |
A4552-69101 |
VISUALIZE-FX2 graphics board - 1280 x 1024 accelerated 3D solids double-buffered 12-plane color graphics board with 8 overlay planes - (Part of A4552A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4552-66503) |
| A4553-69301 |
VISUALIZE-FX4 graphics board - 1280 x 1024 accelerated 3D solids double-buffered 24-plane color graphics board with 8 overlay planes - (Part of A4553B, replacement for A4553A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4553-66503) |
| A4559-66501 |
Texture memory mapping accelerator board - 16MB texture memory and 32KB x 32KB virtual texture cache - For A4553A/B (VISUALIZE-FX4) graphics board - Adds 8 planes |
| A4977-66501 |
HP VISUALIZE-EG PCI graphics card with 4MB memory - The EG card is 8 plane with 8 overlay planes - Can be used in either a 3.3V or 5.0V PCI slot - (Part of A4977A) |
| Power Cord |
8120-1351 |
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-6800 |
Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
| 8120-6869 |
Power cord (Flint Gray) - 3-wire, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Argentina) |
| 8120-6980 |
Power cord (Flint Gray) - 18 AWG, 4.5m (14.8ft) long - Has straight (F) receptacle (For 220V in South America) |
| 8120-8376 |
Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| 8120-8706 |
Power cord (Flint Gray) - 2.3m (7.5ft) long - Has EPSR symbol molded into the plug and straight (F) receptacle (for 220V in Hong Kong) |
| 8120-8871 |
Power cord (Black) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Thailand, Cambodia, Vietnam, and the Philippines) |
| Power Supply |
A4986-69001 |
Power supply assembly (500 watts) - Includes power supply, safety interlock switch, and AC power connector - Mounts in the lower left of the chassis assembly
REQUIRES RETURN OF DEFECTIVE PART(New part = A4986-60001) |
| Rack Mount Kit |
J1457A |
Rack mount kit - Includes the rack mount base, left and right rack ear panels, heavy duty slide rails, various screws, nuts, spacers, and an installation guide |
| Retainer |
A4986-40007 |
PCI board retainer clip - Keeps the PCI boards secure in the system board connector slots |
| Speaker |
5063-4513 |
Speaker - 7.62cm (3.0in) diameter, 8-ohm impedance, 1.5-watt - Has attached 45.7cm (18in) long cable with 2-pin connector |
| Terminator |
A4986-63008 |
LVD (Low voltage differential)/single-ended SCSI terminator - Has integral status LED which displays single-ended or low voltage differential mode - 68 pin (M) with thumbscrews |
| Trackball |
A4992B |
RS232-C Spaceball 4000 3D Motion Controller (Light Gray with Black ball and palm insert) - Includes twelve user buttons (nine on the finger side and three on the thumb side) and a controller ball - Has 3.0m (10ft) cable with 9-pin 'D' connector |
| Upgrade Kit |
A5997A |
C3000 to C3600 upgrade kit |
