c8000 Series Workstation
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Adapter |
A7782A |
USB to 2-port PS/2 adapter - For converting one or two PS/2 devices to USB - For USB only systems running HP-UX 10.20 or later - One type 'A' male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable |
| Airflow Guide |
AB601-62015 |
Airflow guide (Blue plastic) - Provides proper air flow over the eight memory module slots - Does NOT include the fan assembly - Snap-locks in the center of the chassis above the system processor board |
| Cable |
AB601-63005 |
Cable assembly - Connects between the speaker and the optional PCI audio board |
| AB601-63006 |
IDE CD-ROM/DVD drive data cable - Connects between two (first and second) CD-ROM/DVD drives and the system processor board secondary IDE connector |
| AB601-63010 |
Rear panel SCSI cable assembly (includes the rear panel SCSI connector) - Connects between the rear panel and the system board SCSI 'B' connector or optional PCI SCSI card |
| AB601-63004 |
Cable assembly - Connects between the speaker and the optional PCI audio board |
| AB601-63007 |
IDE CD-ROM/DVD drive or hard drive data cable - Connects between the third CD-ROM/DVD drive or two (maximum) hard drives and the system processor board primary IDE connector |
| 8120-8740 |
Internal CD-ROM audio cable - Has large 4 pin (F) connector on one end - Has large 4 pin (F) and small 4 pin (F) connector on the other end - 0.6m (2.0ft) long
NO LONGER SUPPLIED |
| AB601-63011 |
SCSI hard drive cable - Connects between the four (maximum) hard drives and the system processor board SCSI 'A' connector |
| Cable Kit |
AB642A |
External SCSI connector kit - To add an external Ultra320 SCSI port on the rear of the computer - Can be connected to the integrated SCSI bus on the system board or to an optional PCI SCSI card - Includes cable, hardware and instructions |
| Cage |
AB601-62024 |
Optical drive cage - Metal structure that houses the three (maximum) optical drives - Mounts on the upper front of the chassis assembly |
| Control Panel |
AB601-62003 |
Control panel assembly - Includes the power switch, headphone and mic jacks, status LEDs, USB connectors, FireWire connector, connecting cables, intrusion switch and temperature sensor (on attached cable) - Mounts on the front of the chassis assembly |
| Cover |
AB601-67004 |
Access cover (or panel) - Includes the large rectangular cover (Carbon Black) with HP logo, lock, and release latch - Mounts on the left side of the computer in a tower configured system |
| AB601-00017 |
Right side cosmetic cover (or panel) - Used to cover the right side in a tower configured system |
| AB601-40013 |
Top cover (or panel) - Slightly curved plastic panel (Carbon Black) - Mounts on top of the computer in a tower configured system |
| Drive |
A9649-69001 |
146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9649-67001) |
| AE315-69101 |
146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - ORDER A9649-69001
REQUIRES RETURN OF DEFECTIVE PART(New part = AE315-67101) |
| A6060-69005 |
36GB Ultra320 Wide SCSI LVD hard drive (Seagate)- 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A6060-67005) |
| A9649-69002 |
146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high - ORDER A9649-69001 |
| 399415-001 |
IDE DVD+R/RW drive - 16x |
| AB628-69001 |
73GB Ultra320 Wide SCSI LVD hard drive (Segate or Fujitsu) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AB628-62001) |
| 384069-001 |
16X DVD+R/RW half height optical drive
REQUIRES RETURN OF DEFECTIVE PART(New part = 384069-001N) |
| AE318-69101 |
73GB Ultra320 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AE318-67101) |
| AB628-62001 |
73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AE314-69101 |
73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AE314-67101) |
| A7844-62005 |
IDE DVD-ROM drive (Carbon Black) - 16X DVD-ROM read - (Part of AA8682B) |
| Drive (Product) |
A9649A |
146GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A6060B |
36GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| AB628A |
73GB Ultra320 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A7214B |
73GB Ultra320 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A8683B |
ATAPI IDE CD-RW drive - 48X-max write, 12X-max rewrite, 48X-max read - Half height drive with Carbon Black faceplate |
| A8682B |
ATAPI IDE DVD-ROM drive - 16x-max DVD-ROM read, 40x-max CD-ROM read - Half height drive with Carbon Black faceplate |
| Foot |
AB601-40016 |
Chassis foot - Plastic D-shaped foot that provides a hook for the pedestal - Mounts to the bottom of the chassis assembly (four used) |
| Graphics (Product) |
AB638A |
ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot |
| A9653A |
ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) - High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital display outputs - Requires one AGP and one adjacent slot |
| A4982B |
HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
| Guide |
AB601-62008 |
I/O card guide and fan holder - Front I/O card guide (Blue plastic) and housing for the cooling fan (for the hard drives and I/O boards) - Snap-locks on to the side of the hard drive bay |
| Interface (Product) |
A6847A |
1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| AB627A |
IEEE-1394 (FireWire) interface board (with diode) - 400, 200, 100Mbps data rates - Provides two external 6-pin ports and one internal 10-pin port (to connect to the front panel) - Requires one 3.3V PCI slot |
| A6825A |
1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6828A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6828AR |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| Keyboard |
A7861-65353 |
USB keyboard with JIS-109 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Japanese) |
| A7861-65354 |
USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (International-English) |
| A7861-65351 |
USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Simplified Chinese) |
| A7861-65352 |
USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Traditional Chinese) |
| A7861-65343 |
USB keyboard with PC-104 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (United States English) |
| A7861-65344 |
USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (German) |
| A7861-65349 |
USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Italian) |
| A7861-65345 |
USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Spanish) |
| A7861-65347 |
USB keyboard with PC-105 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Swiss) |
| A7861-65350 |
USB keyboard with PC-106 layout (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector (Korean) |
| Memory (Product) |
A8087B |
1.0GB SDRAM DIMM memory module Kit - Includes a pair of 512MB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| A8088B |
2.0GB SDRAM DIMM memory module Kit - Includes a pair of 1.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| A8089B |
4.0GB SDRAM DIMM memory module Kit - Includes a pair of 2.0GB PC2100 DDR-266MHz, ECC, 1.2-inch registered DIMMs - Memory must be installed in like pairs |
| Mouse |
A4983-65103 |
USB 3-button mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
| A7861-65101 |
USB 3-button scrolling mouse (Carbon Black) - Has 2.9m (10ft) cable with type (A) USB connector |
| Nameplate/Logo |
AB601-40026 |
Namplate for the c8000 workstation (Carbon Black) - For use with a rack mount configured workstation - Mounts to the front panel bezel |
| PC Board |
AB601-60515 |
c8000 system board - Has integrated IDE and SCSI drive interfaces - Does NOT include the processors or power modules - RSTRD AB601-60510 |
| 1420-0356 |
3.0V battery (20mm diameter, 3.2mm thick, 220 mA-hr) - Type CR2032 lithium - Mounts on the system processor board |
| AB601-69520 |
c8000 system board - Has integrated IDE and SCSI drive interfaces - Does NOT include the processors or power modules - Mounts in the right side of the computer
REQUIRES RETURN OF DEFECTIVE PART(New part = AB601-60510) |
| PC Board (Audio) |
AB620A |
Audio board - 16 bit audio board with microphone in, stereo out, line in, and line out connectors - Requires one PCI slot |
| AB620-60502 |
Audio sound card - Provides 16-bit stereo mic in, headphone out, line in, line out - Requires one PCI slot - For HP-UX operating system - (Part of AB620A) |
| PC Board (Graphics) |
AB638-60001 |
ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot |
| 351385-001 |
ATI Fire GL T2-128p AGP 8X graphics card (FGL 9600 VPU based) - Mid-range 3D graphics board with 128MB DDR SDRAM memory, dual 400MHz/16-bit RAMDAC, one (F) DVI-I output, and one 15-pin (F) VGA output - Requires one AGP slot - (Part of AA929A, AB638A) |
| 313287-001 |
ATI Fire GL X1 AGP 8X graphics card (FGL 9700 GPU based) - High-end 3D graphics board with 256MB DDR SGRAM memory, dual 400MHz/30-bit RAMDAC, and two DVI-I (F) analog/digital outputs - Requires one AGP and adjacent slot - (Part of A9653A) |
| A4982-69502 |
HP VISUALIZE-fxe (rev B) PCI graphics board - 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982B)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4982-66502) |
| PC Board (Interface) |
287476-001 |
PCI interface card (with diode) - IEEE 1394 (FireWire), two ports - 400, 200, 100Mbps data rates - Provides two external 6-pin ports and one internal 10-pin port (to connect to the front panel) - Requires one 3.3V PCI slot - (Part of AB627A) |
| A6828-60101 |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - (Part of A6828A, A8686A, and A7059A) |
| Panel |
AB601-62013 |
Front panel bezel assembly (Carbon Black plastic) - has cut outs for the optical drive slots and control panel assembly - For a rack mount configured system |
| AB601-62011 |
Front panel bezel assembly (Carbon Black plastic) - has cut outs for the optical drive slots and control panel assembly - For a tower configured system |
| Pedestal |
AB601-62012 |
Chassis pedestal - Stabilization structure on the bottom of the computer in the tower configuration - Snap-locks onto the four plastic feet on the bottom of the chassis assembly |
| Power Cord |
8120-8871 |
Power cord (Black) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Thailand, Cambodia, Vietnam, and the Philippines) |
| 8120-6800 |
Power cord (Flint Gray) - 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel) |
| 8120-8376 |
Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| 8120-6980 |
Power cord (Flint Gray) - 18 AWG, 4.5m (14.8ft) long - Has straight (F) receptacle (For 220V in South America) |
| 8120-8706 |
Power cord (Flint Gray) - 2.3m (7.5ft) long - Has EPSR symbol molded into the plug and straight (F) receptacle (for 220V in Hong Kong) |
| 8120-6869 |
Power cord (Flint Gray) - 3-wire, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in Argentina) |
| 8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-3997 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has 90 degree (F) receptacle (for 220V in Denmark)
NO LONGER SUPPLIED |
| 8120-1689 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-1369 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1351 |
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| Power Supply |
AB601-69001 |
AC power supply assembly (700-watt), with active power factor correction (APFC) - 88V to 265V AC, 47Hz to 66Hz input - Mounts in the upper rear corner of the chassis
REQUIRES RETURN OF DEFECTIVE PART(New part = 0957-2092) |
| 0950-4530 |
Processor power supply (or module) - DC to DC converter module with power supply cable (12V DC in, 1.5V DC at 100A nominal output) - Mounts on the system processor board - Plugs into the base of one of the two processor assemblies |
| Processor |
AB631-69010 |
1.0GHz PA-8800 processor (Mako) - 2-way, 1.5MB L1 cache, 32MB L2 cache - Includes the processor, heat sink assembly, and fan - Mounts on the system processor board - Note: Both processors must be of the same speed and cache size
REQUIRES RETURN OF DEFECTIVE PART(New part = AB631-62010) |
| AB630-69010 |
900MHz PA-8800 processor (Mako) - 2-way, 1.5MB L1 cache, 32MB L2 cache - Includes the processor, heat sink assembly, and fan - Mounts on the system processor board - Note: Both processors must be of the same speed and cache size
REQUIRES RETURN OF DEFECTIVE PART(New part = AB630-62010) |
| Processor Upgrade |
AB637A |
1.0GHz PA-8800 processor upgrade - For adding a second processor module to the computer - Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions - Note: Processor speeds cannot be mixed within a system |
| AB636A |
900MHz PA-8800 processor upgrade - For adding a second processor module to the computer - Includes 2-way processor with 1.5MB L1 cache and 32MB L2 cache, power supply module, and instructions - Note: Processor speeds cannot be mixed within a system |
| Rack Mount Kit |
AB626A |
Rack mount kit - For converting a tower configured system to a rack mount system - Includes the front bezel, mounting rails, cable management arm, and installation instructions |
| Retainer |
AB601-62014 |
AGP PC board retainer - Blue plastic block with Black PC board retainer finger - Snap-locks on the rear of the chassis assembly |
| Shield |
AB601-00016 |
RFI shield (filler) - Metal filler panel for the empty drive slots on the optical drive bay - Mounts to the chassis assembly |
| Tool |
AB601-62026 |
Processor assembly installation/removal tool - Used to loosen the four torx retaining screws and unlock the processor assembly from the system board |
| Tower |
AB625A |
Tower kit - For converting a rack mount system to a tower configuration - Includes top cover, front bezel, cosmetic right side cover, bottom feet, the pedestal, and installation instructions |
| Trackball |
AB602A |
HP Spaceball 5000 (Carbon Black) - Six degrees-of-freedom motion controller (axis), 12 buttons (three under the thumb and nine under the fingers), and 3.9m (12.8ft) cable with 9-pin D-subminiature serial connector |
| Tray |
AB601-62006 |
Drive mounting tray - Includes the two Blue plastic drive rails and spring steel retainer tray - For mounting a 3.5-inch hard drive in the hard drive bay |
| AB601-62010 |
PC board tray assembly - Large metal tray that supports the system board |
