J6000 Workstation (A5990A)
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Bezel |
A5990-62007 |
Front bezel (Dark Gray) - Rectangular piece of plastic with the display bezel, the push-button for the power switch, holes for the snap-in air flow louvers (NOT included - must be ordered separately) - Mounts on the front of the chassis |
| Bracket |
A5990-62003 |
Mounting bracket - For the SCA 'hot pluggable' hard drive - Includes front handle for removing/installing the drive |
| Cable |
A5990-63003 |
Ultra SCSI-2 LVD ribbon cable assembly - 737mm (29in) long with three SCSI connectors - From hard drive backplane PC board to system processor board |
| A5990-63004 |
ATAPI IDE ribbon cable assembly - From system processor board to CD-ROM drive |
| Cage |
A5990-62006 |
PCI card cage bay assembly - Includes the metal support structure, the cooling fan, and the PCI card retainer (Does NOT include the PCI backplane PC board) - Mounts in the left side of the chassis behind the drive bay |
| Chassis |
A5990-62002 |
Chassis assembly (Metal) - Includes the bottom chassis with the riveted in drive bay - Does NOT include the top cover or the PCI card cage assembly |
| Cover |
A5990-40010 |
Cosmetic cover assembly (Dark Gray, plastic) - 50cm (19.5in) x 61cm (24.0in) - For left or right side - Has NO logo or printing on it |
| A5990-62005 |
Chassis cover assembly (Dark Gray) - 16.75 x 23.0-inches - Flat metal cover with four sets of SDRAM board guides and front captive thumbscrew - Mounts on top of the chassis assembly (Under the plastic deskside top cover) |
| A6036A |
Deskside cover kit - For converting a rack mounted J6000, J6700, or J6750 computer into a deskside installation - Includes side covers, pedestal, bezel fillers, and instructions |
| Drive |
A1658-69031 |
18GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST318203LC)
REQUIRES RETURN OF DEFECTIVE PART(New part = A1658-60031) |
| A1658-69032 |
36.4GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector (Seagate Cheetah, model ST336704LC)
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3694) |
| A7207-69001 |
73GB Ultra2 Wide SCSI LVD hard drive - 10,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A7207-67001) |
| A7208-69001 |
36.4GB hot-plug Wide Ultra2 SCSI Low Voltage Differential (LVD) hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A7208-67001) |
| A8069-62001 |
DVD-ROM drive (Read only) - In a slimline (0.5 inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket |
| A8070-62001 |
DVD/CD-RW drive - In a slimline (0.5 inches high) case with ATAPI IDE connector - Includes the chassis mounting bracket |
| Drive (Product) |
A4998A |
18GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A6031A |
36GB Ultra2 Wide LVD SCSI hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A7208A |
36.4GB Ultra2 Wide SCSI LVD hard drive - 15,000 RPM, 3.5-inch form factor, 1.0-inch high, 80-pin SCA connector |
| A7207A |
73GB Ultra2 Wide SCSI LVD hard drive - 10000 RPM, 3.5in form factor, 1.0in high, 80-pin SCA connector |
| A6028A |
32X CD-ROM drive - In a slimline (0.5 inches high) case with ATAPI IDE connector |
| A7854A |
IDE slimline CD-RW drive - 4X CD-R write, 4X CD-RW rewrite, 24X CD-ROM read - (For use with HP-UX 11.0 or higher ONLY) |
| Graphics (Product) |
A1299B |
HP VISUALIZE-fx10 Pro (Revision B) PCI graphics card with 128MB DDR SDRAM memory |
| A4982A |
HP VISUALIZE-fxe PCI graphics card - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz |
| A4982B |
HP VISUALIZE-fxe PCI graphics card with 9.5MB of texture memory (24MB SDRAM total memory) , 32-bit, 66MHz |
| A7789A |
HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system |
| Hardware |
0515-2721 |
Pan head screw with square cone washer - M3.0 X 0.5, 6.0mm long, recessed torx T15 with slot - For mounting the CD-ROM drive into the chassis (two used) |
| Keyboard |
A4983-60401 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Options ABA, ABC, ABH, ABJ, ABM, ABZ and AB2 - English) |
| A4983-60403 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABD - German) |
| A4983-60404 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABE - European Spanish) |
| A4983-60405 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABF - European French) |
| A4983-60406 |
USB keyboard with JIS-109 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AR0 - Japan, Kanji) |
| A4983-60409 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABN - Norwegian) |
| A4983-60411 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABP and ABQ - Switzerland, German/French) |
| A4983-60412 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABS and ABX - Swedish/Finnish) |
| A4983-60413 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABU - U.K., English) |
| A4983-60414 |
USB keyboard with PC-105 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AKX - Belgian Flemish) |
| A4983-60416 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option ABY - Danish) |
| A4983-60421 |
USB keyboard with PC-106 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB1 - Korean) |
| A4983-60423 |
USB keyboard with PC-104 layout - Has 2.9m (10ft) cable with type (A) USB connector (Option AB0 - Taiwan, Traditional Chinese) |
| LCD |
A5990-62015 |
LCD display and power switch assembly - Includes the LCD display, power switch, mounting bracket, and interconnecting cable - Mounts on the front of the chassis |
| Memory (DIMM) |
A3863-69001 |
512MB, 120MHz SDRAM DIMM memory module - (Part of A4995A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3863-66501) |
| A3864-69001 |
1024MB, 120MHz SDRAM DIMM memory module - (Part of A6016A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A3864-66501) |
| Memory (Product) |
A4995A |
512MB, 120MHz SDRAM DIMM memory module |
| A6016A |
1024MB, 120MHz SDRAM DIMM memory module |
| Module |
A1658-86004 |
Realtime clock module kit - Includes clock module, ESD wrist strap, and replacement instructions - Mounts toward the rear center on the system processor board |
| Mouse |
A4983-60101 |
USB 3-button scrolling mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| A4983-65111 |
USB 3-button mouse (Quartz Gray) - Has 2.9m (10ft) cable with type (A) USB connector |
| PC Board |
A5990-66520 |
PCI backplane PC board - Mounts on the far left side of the removable PCI card cage bay |
| A5990-66530 |
Backplane PC board - Small rectangular board with two SCSI SCA connectors on one side and two cable connectors on the other - For connecting the 'Hot Pluggable' hard drives to the system - Mounts on the rear of the hard drive bay |
| A5990-69010 |
System Processor Board - Includes two 552MHz PA-8600 RISC processors - Mounts in bottom of chassis
REQUIRES RETURN OF DEFECTIVE PART(New part = A5990-60010) |
| PC Board (Graphics) |
A4982-69001 |
HP VISUALIZE-fxe PCI graphics board - 3.5MB of texture memory (18MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982A)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4982-66501) |
| A4982-69502 |
HP VISUALIZE-fxe (rev B) PCI graphics board - 9.5MB of texture memory (24MB SDRAM total memory), 32-bit, 66MHz - (Part of A4982B)
REQUIRES RETURN OF DEFECTIVE PART(New part = A4982-66502) |
| A7789-69510 |
HP Fire GL-UX graphics card for PA8700 RISC Workstations - Extreme 3D graphics board with 128MB DDR SDRAM memory, one DVI-I digital dispay output, and one 3-pin mini DIN stereo output - Requires one AGP slot - For HP-UX operating system
REQUIRES RETURN OF DEFECTIVE PART(New part = A7789-60510) |
| Power Cord |
8120-1351 |
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1369 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (for 240V in Australia, New Zealand, and China) |
| 8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-2956 |
Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (for 220V in Denmark) |
| Power Supply |
A5990-69101 |
Power Supply Assembly (600W) - Includes power supply, system speaker, power supply fans, and LCD assembly connector - Mounts in the front right corner of the chassis
REQUIRES RETURN OF DEFECTIVE PART(New part = A5990-60101) |
| Rack Mount Kit |
A5990-62022 |
Rack mount kit - Includes the two slide rack mounting rails, the cable management arm, bezel end caps, rack ears, hardware, and instructions |
| A5993A |
Rack mount kit - Includes the two slide rack mounting rails, the cable management arm, bezel end caps, rack ears, hardware, and instructions |
| Shield |
A5990-62004 |
EMI shield - Rectangular metal cover with flow-through air holes on face - Mounts in front of the hard drive bay on the chassis |
| Trim |
A5990-40002 |
Trim strip (Blue) - Plastic strip with NO printing on it - 40cm (15.75in) long by 1cm (0.375in) wide) - Mounts in the lower indentation on the front bezel |
| Upgrade Kit |
A6056B |
Processor upgrade kit - Upgrades the HP J6000 twin 552MHz PA-8600 processor board to the HP J6700 twin 750MHz PA-8700 (rev 2.3) processor board. Reqires HP-UX 11.0 or HP-UX 11i |
