Integrity Itanium Server - rx5670 (900MHz) (A6837A)
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Bezel |
A5191-04013 |
Front bezel assembly - Mounts on the front of the server - Requires bezel hardware kit |
| Brace |
A6695-00024 |
Rear chassis brace |
| Cable |
A5191-63002 |
Drive power cable - 4-pin (F) connector to 4-pin (F) connector - 8.5cm (3.3in) long |
| A5191-63003 |
Power cable - 10-pin (F) connector to 10-pin (F) connector - 11.4cm (4.5in) long - From PCI I/O backplane to drive/media backplane |
| A5191-63004 |
Data cable - Has 10-pin (F) connectors - From PCI I/O backplane to disk/media backplane |
| A5191-63006 |
SCSI ribbon cable - One 68-pin (M) connector on each end - 39.6cm (15.6in) long |
| A5191-63009 |
Power cable assembly - Large 6-pin (F) connector to small 6-pin (F) connector - 8.3cm (3.3in) long |
| A5191-63010 |
Power cable assembly - Large 6-pin (F) connector to small 6-pin (F) connector - 20.2cm (8.0in) long |
| A5191-63011 |
Ribbon cable - Has two 10-pin (F) connectors - 54cm (21.3in) long |
| A5191-63013 |
Drive power cable - Has two 4-pin (F) connectors - 13.5cm (5.3in) long |
| A6695-63001 |
SCSI ribbon cable - One 68-pin (M) connector on each end - Bus A inner SCSI cable |
| A6695-63002 |
Outer removable media SCSI ribbon cable - One 68-pin (M) connector on each end |
| A6695-63004 |
Chassis intrusion switch cable |
| A6695-63008 |
NetRAID board SCSI ribbon cable - For channel 1 |
| A6695-63009 |
SCSI ribbon cable - From DDS drive to disk media backplane |
| A6695-63010 |
SCSI ribbon cable - One 50-pin (M) connector on each end |
| Cable Kit |
A6144-63005 |
Power harness cable kit - Includes cable and hardware |
| A7003A |
NetRaid board SCSI cables kit - Includes channel 0 and 1 cables |
| Carrier |
A6747-69001 |
Memory extender (carrier) board - Has 20 DIMM slots
REQUIRES RETURN OF DEFECTIVE PART(New part = A6747-67001) |
| A6747A |
Memory extender (carrier) board - Has 20 DIMM slots |
| Converter |
A5191-69105 |
Power converter - Converts the input voltage 100/240V to power that can be used by the power supplies - Has three power cord input plugs
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3470) |
| Cover |
A6695-04011 |
Top cover |
| Drive |
A5220-67003 |
Narrow Single-Ended SCSI-2 slot load DVD-ROM drive - 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) - Has headphone jack and volume control |
| A6276-69002 |
73.4GB hot-swap Ultra-2 LVD SCSI hard drive module - 10,000 RPM, low profile
REQUIRES RETURN OF DEFECTIVE PART(New part = A6276-60001) |
| A6736-69002 |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A6736-64001) |
| A6737-69002 |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A6737-64001) |
| A6845-69002 |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A6845-64001) |
| A6846-69002 |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector
REQUIRES RETURN OF DEFECTIVE PART(New part = A6846-64001) |
| Drive (Product) |
A5557A |
Narrow Single-Ended SCSI-2 slot load DVD-ROM drive - 6X DVD-ROM read, 32X CD-ROM read (Pioneer DVD-303/304) - Has headphone jack and volume control |
| A5558A |
12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive - 5.25in form factor |
| A6091A |
73GB hot-plug Ultra2 SCSI hard drive - 10,000 RPM, low profile |
| A6091AR |
73GB hot-plug Ultra2 SCSI hard drive - 10,000 RPM, low profile |
| A6736A |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6736AR |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6737A |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6737AR |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6738A |
73GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6738AR |
73GB hot-plug Ultra160 Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A6845A |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector |
| A6845AR |
18GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector |
| A6846A |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector |
| A6846AR |
36GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 15,000 RPM, low profile, 80-pin SCA connector |
| A7051A |
73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| A7051AR |
73GB hot-plug Ultra160 Wide Low Voltage Differential (LVD) SCSI hard drive - 10,000 RPM, low profile, 80-pin SCA connector |
| C1537-69202 |
12GB/24GB Single-Ended SCSI-2 DDS-3 (DAT) tape drive - 5.25-inch form factor
REQUIRES RETURN OF DEFECTIVE PART(New part = C1537-67202) |
| Fan |
A5191-04003 |
172mm I/O card cage 'hot swap' fan |
| A5191-67006 |
'Hot swap' fan for the power converter |
| A6695-04006 |
172mm 'hot swap' chassis fan |
| Filler |
A5236-40024 |
Disk filler panel - Fills an empty drive module slot |
| A6695-00054 |
Memory extender slot filler - Fills an empty memory extender slot |
| Graphics (Product) |
A6869A |
VGA video/USB core I/O PCI board - Has one video connector and two USB connectors |
| Guide |
A6695-00023 |
Rear I/O card guide |
| A6695-00025 |
Front I/O card guide |
| Interface (Product) |
A5159A |
Dual port PCI Fast Wide High Voltage Differential SCSI-3 adapter - Has two external very high density 68-pin connectors and two internal high density 68-pin connectors - For HP-UX operating system |
| A5506B |
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A6828A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6828AR |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6829A |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6829AR |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6847A |
1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6875A |
Management processor board - For controlling the system console, reset and power management functions - Includes SIO (remote, console and UPS), VGA and LAN connectors - NOT supported in tower configurations |
| A8084A |
FireWire (IEEE-1394A) adapter - 3-port |
| A8685A |
1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector - Requires one PCI slot - For HP-UX operating system |
| B5509BA |
100Base-TX LAN host adapter board with one RJ-45 port - Requires one PCI slot - Includes the board, software, software license, and installation instructions - For HP-UX operating system |
| P3475B |
NetRAID-2m dual channel disk array controller with 128MB cache - PCI board with two internal 68-pin high density and four external 68-pin very high density Ultra3 SCSI connectors |
| P3492A |
10/100Base-T IPSec (3DES) LAN host adapter board - With one RJ-45 connector - Reqires one PCI slot - For Windows and Linux operating systems |
| Memory (DIMM) |
A6834-69001 |
1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module
REQUIRES RETURN OF DEFECTIVE PART(New part = A6834-60001) |
| A6967AX |
256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6968AX |
512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| Memory (Product) |
A6746A |
2.0GB DDR-SDRAM memory upgrade kit - Includes four 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A6833A |
1.0GB DDR-SDRAM memory upgrade kit - Includes four 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A6834A |
4.0GB DDR-SDRAM memory upgrade kit - Includes four 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| PC Board |
A5191-67104 |
Disk/media backplane - Has power and SCSI connectors for removable media mass storage devices on one side and four SCA connectors for hot-plug hard drives on the other side |
| A6695-69004 |
PCI card backplane - Has 12 PCI slots
REQUIRES RETURN OF DEFECTIVE PART(New part = A6695-67004) |
| A6695-69306 |
System baseboard - Has slots and connections for processor boards, memory boards, and other boards
REQUIRES RETURN OF DEFECTIVE PART(New part = A6695-67106) |
| PC Board (Graphics) |
A6869-67501 |
VGA video/USB core I/O PCI board - Has one video connector and two USB connectors |
| PC Board (Interface) |
A6695-63007 |
NetRAID SCSI cable - Has one Very High Density 68-pin SCSI connector at each end |
| A6695-69101 |
MP/SCSI core I/O PCI board
REQUIRES RETURN OF DEFECTIVE PART(New part = A6695-67101) |
| A6794-69001 |
LAN/SCSI core I/O PCI board (Procurium)
REQUIRES RETURN OF DEFECTIVE PART(New part = A6794-60001) |
| Plate |
A6695-00026 |
Shuttle plate |
| Power Cord |
8120-1351 |
Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 240V in the UK, Hong Kong, Singapore, Malaysia, and Brunei) |
| 8120-1378 |
Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 120V in USA, Canada, Latin America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam) |
| 8120-1689 |
Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh, Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam) |
| 8120-8376 |
Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| Power Supply |
A5527-69001 |
Hot-swap redundant power supply - 100/240VAC input, 50/60Hz, autoswitching
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3471) |
| Processor |
A6820-69101 |
Intel Itanium 2 processor - 900MHz (McKinley, 400MHz front side bus, 1.5MB Level-3 cache)
REQUIRES RETURN OF DEFECTIVE PART(New part = A6820-67101) |
| A9809-69001 |
Intel Itanium 2 processor - 1.00GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache)
REQUIRES RETURN OF DEFECTIVE PART(New part = A9809-67001) |
| A9810-69001 |
Intel Itanium 2 processor - 1.5GHz (McKinley, 400MHz front side bus, 3.0MB Level-3 cache)
REQUIRES RETURN OF DEFECTIVE PART(New part = A9810-67001) |
| Processor Upgrade |
A6820A |
Intel Itanium 2 processor upgrade - Includes one 900MHz (200MHz front side bus, 1.5MB cache) processor |
| A6836A |
Intel Itanium 2 processor upgrade - Includes one 1.0GHz (200MHz front side bus, 3MB cache) processor |
| Separator |
A3639-04024 |
PCI card separator/extractor with light pipe |
| Status Panel |
A5191-60013 |
Display board - Has on/off switch and five server status LEDs |
| Switch |
5040-6317 |
Chassis intrusion switch |
