HP 9000 Server rp4440 series
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Adapter |
A7782-63001 |
USB to two-port PS/2 adapter - For converting one or two legacy or contemporary PS/2 devices to USB - For USB only systems running HP-UX 10.20 or later - One type 'A' Male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable - (A7782A) |
| A7782A |
USB to 2-port PS/2 adapter - For converting one or two PS/2 devices to USB - For USB only systems running HP-UX 10.20 or later - One type 'A' male USB connector to two 6-pin mini-DIN connectors, 38.1cm (15in) long cable |
| Battery |
1420-0386 |
3.0V battery - 250mAh, lithium coin cell battery - Type CR2330 or equivalent - Not rechargeable |
| Bezel |
A7124-67003 |
Front bezel - For rack mount configuration |
| Cable |
A6961-63002 |
Display board (status panel) cable - From the display board to the IDE drive to the midplane board |
| A6961-63003 |
Power distribution board to midplane board cable - Has 10-pin connectors at each end |
| A6961-63004 |
Power distribution board to midplane board ribbon cable |
| A6961-63005 |
QuickFind diagnostic board to midplane board cable |
| A6961-63006 |
Internal SCSI cable |
| A6961-63008 |
SCSI backplane board to midplane board cable |
| A6961-63011 |
SCSI controler jumper cable (simplex only) |
| Clip |
A6961-67021 |
PCI retention clip |
| Conversion Kit |
A6979A |
Pedestal kit - Includes parts required to change from the rack mount configuration to deskside pedestal |
| Divider |
A6961-67020 |
I/O board divider - Provides short circuit protection to the hot-plug PCI accessory boards - Includes doorbell and latch |
| Drive |
A7007-04001 |
Slimline DVD-ROM/CD-RW combination drive |
| A7163-04001 |
Slimline DVD-ROM drive |
| A9761-69001 |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9761-64001) |
| A9896-69001 |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9896-64001) |
| Drive (Product) |
A7007A |
Slimline DVD-ROM/CD-RW combination drive |
| A7163A |
Slimline DVD-ROM drive |
| A9776A |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9776AR |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9777A |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9777AR |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9778A |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9778AR |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9896A |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9896AR |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9897A |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9897AR |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9898A |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9898AR |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| Fan |
A6961-04028 |
Power supply hot-swap fan assembly - Includes two fans mounted in a metal frame - Smaller of the two fan sizes found in the chassis |
| A6961-04055 |
I/O section hot-swap fan assembly - Includes two fans mounted in a metal frame - Larger of the two fan sizes found in the chassis |
| Filler |
A6961-40034 |
DIMM slot filler - Covers unused DIMM slots to aid in cooling - One DIMM filler covers two adjacent DIMM slots |
| Graphics (Product) |
A6150B |
PCI 2D graphics kit - Includes one 2D PCI graphics card and one PCI 2-port USB card |
| Interface (Product) |
A3739B |
Dual fiber distributed data interface (FDDI) adapter - Has a dual-attach connection to a FDDI - With two SC duplex-style keyed connectors |
| A5230A |
100Base-TX PCI LAN adapter with one RJ-45 port |
| A5506B |
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A5513A |
155Mb/s ATM PCI LAN adapter with MMF connectors |
| A5783A |
Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board |
| A5838A |
Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors |
| A6386A |
HyperFabric2 PCI 4X fiber adapter interface and switch - For HP-UX operating system |
| A6748A |
HP 8-port MUX PCI Multiplexer interface board - Speeds up to 230,400 bps per port, 33MHz bus speed - Occupies one PCI slot - For HP-UX operating system |
| A6749A |
HP 64-port MUX PCI Multiplexer interface board |
| A6795A |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6795AR |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6825A |
1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A6826A |
2Gbps Fiber Channel host bus adapter - For 64-bit Linux and HP-UX - Dual channel, short wave, 64-bit, 133MHz PCI-X - Has LC connectors |
| A6828A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6828AR |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A6829A |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6829AR |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6847A |
1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A7143A |
Four channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 60 devices - Has four 68-pin very high density external connectors, and four 68-pin high density internal connectors - For HP-UX operating system |
| J3525A |
WAN adapter - Two port X.25 PCI frame relay adapter card |
| Keyboard (Product) |
A7861C |
USB keyboard and mouse kit - Includes USB Windows 104/105-key keyboard (Carbon black) and USB two-button scrolling mouse (Carbon black) |
| Memory (DIMM) |
A6967AX |
256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6968AX |
512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory module |
| A6969-69001 |
1.0GB, 266MHz, PC2100, ECC DDR-SDRAM DIMM memory module
REQUIRES RETURN OF DEFECTIVE PART(New part = A6969AX) |
| Memory (Product) |
A7128A |
1.0GB DDR-SDRAM memory upgrade kit - Includes four 256MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A7129A |
2.0GB DDR-SDRAM memory upgrade kit - Includes four 512MB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A7130A |
4.0GB DDR-SDRAM memory upgrade kit - Includes four 1.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| A7131A |
8.0GB DDR-SDRAM memory upgrade kit - Includes four 2.0GB, 266MHz, PC2100, non-ECC DDR-SDRAM DIMM memory modules |
| PC Board |
A6961-67106 |
SCSI duplex board |
| A6961-69007 |
Processor extender board - Has two processor sockets on one side and two on the other side - Plugs into the midplane board
REQUIRES RETURN OF DEFECTIVE PART(New part = A6961-67007) |
| A6961-69201 |
I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A6961-69204 |
Memory board (16-slot) - Plugs into the midplane board
REQUIRES RETURN OF DEFECTIVE PART(New part = A6961-67204) |
| A6961-69401 |
I/O baseboard - Has eight 64-bit PCI slots - Includes VRMs |
| A9738A |
Memory board (16-slot) - Supports up to four quads of memory - Plugs into the midplane board |
| A9739-69007 |
Memory board PCA (32-slot) - For firmware versions greater than 1.13 - Plugs into the midplane board
REQUIRES RETURN OF DEFECTIVE PART(New part = A9739-67007) |
| A9739A |
Memory board (32-slot) - Supports up to eight quads of memory - Plugs into the midplane board |
| PC Board (Interface) |
A6829-60101 |
Dual channel Ultra160 LVD SCSI adapter board - Supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - Requires one 64-bit PCI slot |
| Pedestal |
A6979-04001 |
Pedestal kit - Includes parts required to change from the rack mount configuration to deskside pedestal |
| Power Cord |
8120-0698 |
Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (for 220V in the USA and Canada) |
| 8120-6514 |
Daisy chain power cord (Jade Gray) - 18 AWG, 2.0m (6.6ft) long - Has (M) C14 plug for power input, and (F) C13 plug for power output |
| 8120-8376 |
Power cord (Flint Gray) - 17 AWG, 2.2m (7.3ft) long - Has straight (F) receptacle (for 220V in China) |
| Power Supply |
A6961-67016 |
Hot-swap redundant power supply |
| A6976A |
Hot-swap redundant power supply |
| Processor |
A7126-69002 |
HP PA-RISC processor - 900MHz PA-RISC 8800 dual core with 3MB cache - Includes attached heat sink with fan
NO LONGER SUPPLIED |
| Processor Upgrade |
A7125A |
HP PA-RISC processor upgrade kit - Includes one 800MHz PA-RISC 8800 dual core processor and attached heat sink with fan |
| A7126A |
HP PA-RISC processor upgrade kit - Includes one 900MHz PA-RISC 8800 dual core processor and attached heat sink with fan |
| A7135A |
HP PA-RISC processor upgrade kit - Includes one 1.0GHz PA-RISC 8800 dual core processor and attached heat sink with fan |
| Rack Mount Kit |
A6977A |
Rack mount kit - Includes side-mount slides and cable management arm |
| Status Panel |
A6961-67008 |
Front display/status panel - Has the power button and three status LEDs |
| Terminal |
C1099A |
Alphanumeric terminal console |
| Voltage Regulator |
0950-4417 |
Voltage Regulator Module (VRM) 12.0VDC
NO LONGER SUPPLIED |
| 0950-4418 |
Voltage Regulator Module (VRM) 5.0VDC
NO LONGER SUPPLIED |
| 0950-4419 |
Voltage Regulator Module (VRM) 3.3VDC
NO LONGER SUPPLIED |
