9000 Server - rp8420
| KEYWORD |
PART NUMBER |
DESCRIPTION |
|---|
| Arm |
A6093-04046 |
Cable management towel rack kit |
| Cable |
A6093-63044 |
Chassis intrusion switch cable |
| A6093-63040 |
DC signal distribution cable |
| A6093-63038 |
Front fan power cable assembly |
| A6093-63055 |
Mass storage data ribbon cable |
| A6093-63028 |
Mass storage data ribbon cable |
| A6093-63048 |
Mass storage power cable |
| AB297-2010A |
PCI OLR ribbon cable |
| A6093-63049 |
RS487 interface cable |
| A6093-63039 |
Rear fan power cable assembly |
| A6093-63058 |
SBA REO cable kit |
| Cage |
A6093-60113 |
PCI-X card cage assembly |
| Computer |
AB300A |
HP9000 and Integrity server console - Includes T5500 Thin Client, S5500 monitor, keyboard, mouse, and power cord |
| Cover |
A6093-04120 |
Chassis top cover
NO LONGER SUPPLIED |
| A6093-04122 |
Left side chassis cover
NO LONGER SUPPLIED |
| A6093-04121 |
Right side chassis cover
NO LONGER SUPPLIED |
| Drive |
AB351-62001 |
DVD+RW drive |
| AB422-69001 |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AB422-67001) |
| A9898-69002 |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9898-64001) |
| C5686-69204 |
20/40GB Ultra Wide Low Voltage Differential/Single-Ended (LVD/SE) SCSI-2 DDS-4 internal drive (Carbon) - 5.25-inch form factor, half-height - (C5686B, Q1553A)
REQUIRES RETURN OF DEFECTIVE PART(New part = C5686-67204) |
| AB420-69001 |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AB420-67001) |
| A9896-69001 |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9896-64001) |
| AB421-69001 |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = AB421-67001) |
| A9897-69001 |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon Black and Port) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high
REQUIRES RETURN OF DEFECTIVE PART(New part = A9897-64001) |
| AB351-67002 |
DVD+RW drive |
| Drive (Product) |
A9882A |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9882AR |
146GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 10,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9878A |
20/40GB Ultra Wide Low Voltage Differential/Single-Ended (LVD/SE) SCSI-2 DDS-4 DAT drive (Carbon) - 5.25-inch form factor, half-height |
| A9880A |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9880AR |
36GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9881A |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9881AR |
73GB hot-plug Ultra320 Low Voltage Differential (LVD) SCSI hard drive (Carbon) - 15,000 RPM, 3.5-inch form factor, 1.0-inch high |
| A9879A |
IDE DVD-ROM drive - 5.25-inch form factor |
| Fan |
A6093-67117 |
Front hot-swap smart fan assembly |
| A6436-67001 |
RISC processor cooling fan |
| A6093-67118 |
Rear hot-swap smart fan assembly |
| A6093-67018 |
Rear hot-swap smart fan assembly |
| A6752-04071 |
Smart fan assembly - For hot-swap PCI card cage |
| Filler |
A6912-00014 |
DVD-ROM drive slot filler panel (Carbon) |
| 5001-6892 |
Filler for empty PCI slot |
| A6198-60003 |
Hot-swap hard drive slot filler panel (Carbon Black) |
| Guide |
A6093-40014 |
Front card guide - Includes two guides |
| A6093-40015 |
Rear card guide - Includes two guides |
| Interface (Module) |
AB306A |
Core I/O module |
| Interface (Product) |
A6847A |
1000Base-SX Gigabit Ethernet network interface adapter board - Has one duplex fiber optic connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A9782A |
1000Base-SX and 2Gbps Fibre Channel Host Bus Adapter - For HP-UX - Dual channel, short wave, 64-bit, 3.3V, 133MHz PCI-X - Has LC connectors |
| A6825A |
1000Base-T Gigabit Ethernet network interface adapter board - Has one RJ-45 connector, requires one 64-bit PCI slot - For HP-UX operating system |
| A7012A |
1000Base-T Gigabit PCI-X Ethernet network interface adapter board - Has two RJ-45 network ports, requires one 64-bit PCI-X slot - For HP-UX operating system |
| A9784A |
1000Base-T and 2Gbps Fibre Channel Host Bus Adapter - For HP-UX - Dual channel, copper and short wave, 64-bit, 3.3V, 133MHz PCI-X - Has LC and RJ-45 connectors |
| A5506B |
100Base-TX LAN four port host adapter board (Supports all PCI bus configurations) - Has four RJ-45 connectors - Require one 64-bit PCI slot - For HP-UX operating system |
| A5230A |
100Base-TX PCI LAN adapter with one RJ-45 port |
| A5513A |
155Mb/s ATM PCI LAN adapter with MMF connectors |
| A6826A |
2Gbps Fiber Channel host bus adapter - For 64-bit Linux and HP-UX - Dual channel, short wave, 64-bit, 133MHz PCI-X - Has LC connectors |
| A6795A |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A6795AR |
2Gbps Tachyon XL2 PCI Fiber Channel adapter - For HP-UX operating system - Single channel, short wave, 64-bit, 66MHz PCI - Has LC connectors |
| A5159B |
Dual channel Fast Wide Differential SCSI adapter board - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A6829A |
Dual channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 30 devices - Has two 68-pin very high density external connectors, and two 68-pin high density internal connectors - For HP-UX operating system |
| A3739B |
Dual fiber distributed data interface (FDDI) adapter - Has a dual-attach connection to a FDDI - With two SC duplex-style keyed connectors |
| A5838A |
Dual port 10Base-T/100Base-TX LAN and dual port Ultra2 Low Voltage Differential/Single-Ended (LVD/SE) SCSI adapter - Has two RJ-45 LAN ports and two external 68-pin very high density connectors |
| A6749A |
HP 64-port MUX PCI Multiplexer interface board |
| A6748A |
HP 8-port MUX PCI Multiplexer interface board - Speeds up to 230,400 bps per port, 33MHz bus speed - Occupies one PCI slot - For HP-UX operating system |
| A6386A |
HyperFabric2 PCI 4X fiber adapter interface and switch - For HP-UX operating system |
| A6828A |
Single channel Ultra160 LVD SCSI adapter board - Compliant with SCSI SPI-3, supports up to 15 devices - Has one 68-pin very high density external connector, and one 68-pin high density internal connector - For HP-UX operating system |
| A5783A |
Token ring (IEEE 802.5 networks) 4/16/32Mbs network interface board |
| J3525A |
WAN adapter - Two port X.25 PCI frame relay adapter card |
| Latch |
A6093-40041 |
PCI OLR gate (latch) - Secures the PCI card and enables the PCI slot |
| A6093-67214 |
PCI OLR latching assembly - Disables PCI slots for hot-swap functionality and retains the PCI cards - Includes four OLR housings, 16 OLR buttons, PC board, 16 OLR paddles, and OLR switch cable |
| A6093-60006 |
PCI card OLR assembly - latch assembly that activates the PCI slots and secures the PCI cards
NO LONGER SUPPLIED |
| Memory (DIMM) |
A6098-69101 |
1GB high-density SDRAM DIMM (single DIMM)
REQUIRES RETURN OF DEFECTIVE PART(New part = A6098-60101) |
| A6802-69101 |
256MB high-density SyncDRAM DIMM (single DIMM)
REQUIRES RETURN OF DEFECTIVE PART(New part = A6802-60001) |
| A6100-69001 |
2GB high-density SDRAM DIMM
REQUIRES RETURN OF DEFECTIVE PART(New part = A6100-67001) |
| AB322-69001 |
4GB high-density SDRAM DIMM (four 1GB DIMMs)
REQUIRES RETURN OF DEFECTIVE PART(New part = AB322-67001) |
| A5198-69101 |
512MB high-density SyncDRAM DIMM memory |
| Memory (Product) |
AB322A |
16GB SDRAM DIMM memory module upgrade kit - Includes four 4GB high-density SDRAM DIMMs |
| AB307A |
2.0GB SDRAM DIMM memory module upgrade kit - Includes a pair of 1GB high-density SDRAM DIMMs |
| AB308A |
4.0GB SDRAM DIMM memory upgrade kit - Includes four 1GB high-density SDRAM DIMMs |
| AB309A |
8.0GB SDRAM DIMM memory module upgrade kit - Includes four 2GB high-density SDRAM DIMMs |
| Nameplate/Logo |
A6912-40002 |
Nameplate for the rp8420 server |
| PC Board |
A6093-67007 |
AC voltage power distribution board |
| AB589B |
ORDER A6093-60001 |
| A6093-67008 |
DC voltage power distribution board |
| A6093-67003 |
Mass storage backplane - Has SCA slots for hot-swap hard drives and connectors for power and SCSI data cables |
| A6093-69213 |
PCI-X card cage assembly - Includes the PCI-X I/O board, PCI card separators, metal card cage with fan frame
REQUIRES RETURN OF DEFECTIVE PART(New part = A6093-60113) |
| A6093-69313 |
PCI-X card cage assembly - Includes the PCI-X I/O board, PCI card separators, metal card cage with fan frame
REQUIRES RETURN OF DEFECTIVE PART(New part = A6093-60013) |
| A6093-69401 |
System backplane - Has slots for cell boards and core I/O boards and connectors for system cables
REQUIRES RETURN OF DEFECTIVE PART(New part = AB589B) |
| PC Board (Interface) |
A7109-69001 |
Core I/O board |
| Pedestal |
A9904A |
Pedestal configuration kit - Includes parts needed to convert from rack mount to pedestal |
| Power Cord |
8120-6961 |
Daisy chain' power cord (Black) - 14 AWG, 4.0m (13.1ft) long - Has (M) C20 plug for power input, and (F) C19 plug for power output |
| 8120-6897 |
Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has IEC-309 (M) plug for power input and straight (F) C19 receptacle (for 220V in Denmark and Switzerland) |
| 8120-6903 |
Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has NEMA L6-20P (M) plug for power input and (F) C19 receptacle for power output (for the United States, Canada, and Japan) |
| 8120-6895 |
Power cord (Black) - 15 AWG, 4.5m (14.8ft) long - Has a stripped end for power input and straight C19 (F) receptacle for power output |
| Power Module |
0957-2187 |
PCI power supply module - Hot-swap power module for the PCI backplane |
| 0950-3819 |
PCI power supply module - Hot-swap power module for the PCI backplane |
| Power Supply |
0957-2183 |
Bulk power supply - Redundant hot-swap power supply (Celestica) |
| A6093-69021 |
Bulk power supply - Redundant hot-swap power supply - (Celestica)
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3794) |
| A6093-69123 |
PCI power supply module - Hot-swap power module for the PCI backplane - Power module slots located on the front above the fans
REQUIRES RETURN OF DEFECTIVE PART(New part = 0950-3819) |
| Processor |
A6913-69206 |
Processor cell board assembly - Includes four 900MHz PA-RISC 8800 dual core processors, does not include memory
REQUIRES RETURN OF DEFECTIVE PART(New part = A6913-67106) |
| A6913-69106 |
Processor cell board assembly - Includes four 900MHz PA-RISC 8800 dual core processors, does not include memory |
| A6913-69207 |
Processor cell board assembly - Includes one 1.0GHz PA-RISC 8800 dual core processor, does not include memory
REQUIRES RETURN OF DEFECTIVE PART(New part = A6913-67107) |
| A6913-69107 |
Processor cell board assembly - Includes one 1.0GHz PA-RISC 8800 dual core processor, does not include memory |
| Processor Upgrade |
A6437A |
HP PA-RISC processor upgrade kit - Includes one 1.0GHz PA-RISC 8800 dual core processor and attached heat sink with fan |
| A6913A |
Processor and memory cell board - Does not include processors or memory (Rp74/84, rx76/86 cpu) |
| A6436A |
HP PA-RISC processor upgrade kit - Includes two 900MHz PA-RISC 8800 dual core processors and attached heat sink with fan |
| Rack Mount Kit |
J1530A |
Field rack mount kit for rpXXXX series servers |
| Separator |
5065-0246 |
PCI card separator panel with light pipe
NO LONGER SUPPLIED |
| Shield |
A6093-67016 |
Cell board air shield (CPU cover) - Includes damper, spring, hinge, and front and rear card guides |
| Snap |
C2786-40002 |
Attachment snap |
| Software |
AB227A |
Reflection terminal emulation software (CD-ROM) |
| Strain Relief |
A6093-67029 |
AC cable strain relief |
| Switch |
5040-6317 |
Chassis intrusion switch |
| Tool |
A5201-68004 |
Anti-static mat, 24in x 36in with grounding strap |
| Voltage Regulator |
0950-4709 |
High voltage DC to DC conterter (high voltage VRM) |
| 0950-4708 |
Low voltage DC to DC conterter (low voltage VRM) |
